The BM6040 Pleated filter High Flow filter is a large-diameter, coreless, single open-ended, pleated cartridge with an inside-to-outside flow pattern. The filter’s unique crescent-shaped pleat geometry, combined with its large 152.4mm (6-inch) diameter and proprietary range of available besta filter media, allows you to use significantly fewer filters and smaller housings for high flow-rate applications. The BM 6040 Pleated filter High Flow Filter Cartridges can completely replace Cartridge FD124-03. Filter Element Name:HFU640CAS010JUPall HFU
Features and Benefits
- Coreless large diameter cartridge, synthetic construction, to minimize waste disposal
- High flow rate per filter cartridge
- Up to 40 times fewer cartridges to change out
- Up to 50% smaller filter system possible
- Available in a variety of filter lengths and grades
- Absolute-rated filter medium for reproducible performance
- Features proprietary unique crescent-shaped pleat geometry
- Inside-to-outside flow pattern that traps contaminant inside the element, thus preventing polluting the treated water during the cartridge change-out
- Handle for easy cartridge replacement
Product description
Filter Dimensions (nominal) | |
Diameter (inch/mm) | 6/152.4 |
Length (inch/mm) | 40/1016 |
Suggested Maximum Water Flow Per Cartridge usgpm/L/min/MGD | 350/1325/0.5 |
O-Ring/Gasket | Etylene propylene U-Cup |
Materials of Construction | |
Filter Medium | Pleated Polypropylene/Polyether Sulfone Membrane |
Support/Drainage Materials | Polypropylene |
End Caps | Glass-Filled Polypropylene |
Wrap Materials | Polypropylene |
Operating Conditions | |
Maximum Differential Pressure(normal inside-to-outside flow) | 3.44 bard at 82°C/50 psid at 180°F |
Filter Cartridge Pressure Drop (typical) | 0.74psid/100gpm 2.25mbar/M3/hr |