BMBW-4021-LP High water production

LP (low pressure) series of aromatic polyamide compound membrane element developed by BM has the properties of low-pressure operation, high permeate flow and excellent desalination and is applicable to desalination of brackish water. Besides, it is particularly applicable to fabrication of high-purity water for electronic industry and electric power industry owing to its excellent performance in removing soluble salts, TOC, SiO2, etc.

Being suitable for desalting such water sources as surface water (NaCl ≤10000ppm), underground water, tap water and municipal water, etc., LP series is mainly applicable to treatment of various industrial water such as industrial-purpose pure water, boiler water replenishment in power plants, and can be also applied to such brackish water applications, such as treatment of high-concentration saline waste water and production of beverage-purpose water.

Test conditions：

Testing pressure                                             225 Psi（1.55Mpa）

Testing solution temperature                      25℃

Concentration of testing solution                2000ppm

pH value of testing solution                         7.0±0.5

Recovery rate of Single element                15%

Feed spacer：                                                31mil（0.79mm）

BMBW-4021-LP

Operation limits & conditions：

Max. Working Pressure                                                                     600psi（4.14Mpa）

Max. Temperature of Feed water                                                    45℃

Max. Volume of Feed water                                                              16gpm（3.6 m3/h）

Max. Feed water SDI15                                                                           5

Max. Feed water Turbidity                                                               1.0NTU

pH Range of Feed water during Continuous Operation            2～11

pH Range of Feed water during Chemical Cleaning                  1～13

Residual Chlorine Concentration of Feed Water                       ＜0.1ppm

Max. Pressure Drop of Single Membrane Element               15psi（0.1Mpa）

Max. Pressure Drop of Single Pressure Vessel with Six elements    50psi（0.34Mpa）