BMUFSI55 Repuesto Pentair Aquaflex 55

Bmufsi55 membrana de ultrafiltración is fully compatible with Pentair Aquaflex 55. Same size and performance, ideal for water treatment and beverage production

Performance Parameters (for most water sources)

• Permeate Flow Rate:2–6 m³/h
• Turbidez del permeado:≤0.1 ntu, SDI₁₅ < 3
• coli and Coliform Bacteria in Permeate:Not detectable
• Bacteria Removal Rate:≥6 log

Membrane Module Type

• Membrane Structure:Hollow Fiber Ultrafiltration Membrane
• Module Dimensions:Φ219 mm × 1902 mm
• Material de membrana:PES/PVP (Politersulfona / Polyvinylpyrrolidone)
• Nominal Pore Size:02 µm
• Nominal Membrane Area:55 m²
• Fiber Dimensions:Diámetro interno (0.8 mm)

It is fully compatible with and can perfectly replace the Pentair Aquaflex 55 membrana de ultrafiltración

Application Data

• Typical Permeate Flux Range:50–100 L/m²·h
• Maximum Inlet Pressure:5 MPA
• Presión transmembrana máxima (TMP):24 MPA
• Maximum Inlet Turbidity:100 NTU
• Temperatura de funcionamiento:5–45℃
• Rango de pH operativo:2–13
• Modo de funcionamiento:Inside-out filtration, either dead-end or cross-flow operation

Operating Data

• Tasa de flujo de retrolavado:150–280 L/m²·h
• Duración de retrolavado:20–60 seconds
• Backwash Frequency:Every 20–60 minutes
• Chemical Cleaning Cycle:Every 30–180 days
• Chemical Cleaning Agents:Sodium hypochlorite, chlorine dioxide, sodium hydroxide, hydrochloric acid, citric acid