LGSW440SR Equivalent – BMSW440-HR

SW series fouling-resistant and scaling-resistant aromatic polyamide composite membrane elements developed by Besta Membrane are designed for complex water quality. The SW series membrane elements use a special membrane preparation process, which gives them an extremely high sodium chloride desalination rate and boron rejection rate. This allows for a reduction in the cost of achieving the water quality required by WHO standards. Additionally, the products have a high degree of chemical cross-linking, enabling them to withstand more frequent chemical cleaning cycles and adapt to high pressure and high salinity environments.

SW series membrane elements are suitable for desalination of high-concentration seawater and brackish water desalination with high recovery systems. They are widely used in seawater desalination projects and can also be applied in reclaimed water reuse and zero discharge projects.

Module　        Active Membrane Area     Average Permeate             Stable rejection         Min rejection    Boron Removal

                                            ft2(m2)                              GPD（m³/d）　　　　    Rate（％）                         Rate（％）         Rate（％)

SW-8040-440-HR       440（41.0）                          6600（25.0）                     99.85　　　　　　              99.70                 93

Test conditions：

Testing pressure                                                                                   800 Psi（5.5Mpa）

Testing solution temperature                                                            25℃

Concentration of testing solution                                                     32000ppm

pH value of testing solution                                                              8.0

Recovery rate of Single element                                                       8%

Feed spacer：                                                                                     28mil

Operation limits & conditions：

Max. Working Pressure                                                                                             1200psi（8.27Mpa）

Max. Temperature of Feed water                                                                            45℃

Max. Volume of Feed water                                                                                      75gpm（17 m3/h）

Max. Feed water SDI15                                                                                               5

Max. Feed water Turbidity                                                                                         1.0NTU

pH Range of Feed water during Continuous Operation                                        2～11

pH Range of Feed water during Chemical Cleaning                                               1～13

Residual Chlorine Concentration of Feed Water                                                      ＜0.1ppm

Max. Pressure Drop of Single Membrane Element                                                15psi（0.1Mpa）

Max. Pressure Drop of Single Pressure Vessel with Six elements                       50psi（0.34Mpa）